[TRNSYS-users] TESS Type 927 Load-Source definition

[David BRADLEY]

Mattias,
   The source and load sides remain the same whether the heat pump is in 
heating or cooling mode. The load side is defines as the side whose 
temperature you are trying to control. The source side absorbs energy 
from its surroundings when the heat pump is in heating mode and rejects 
energy to its surroundings when the heat pump is in cooling mode.
kind regards,
  David


On 3/26/2015 4:28 AM, Mattias Ericsson wrote:
>
> Dear TRNSYS users!
>
> I am creating my own performance files for the TESS Type 927 
> Water-Water heat pump.
>
> In the sample files “source side” and “load side” is used to define 
> the two sides of the heat pump. In heating mode I assume the source 
> side is the evaporator and the load side is the condenser but is the 
> situation reversed in cooling mode? i.e. the load side is the 
> evaporator and the source side is the condenser? In the sample files 
> this seems to be the situation judging by the temperatures used.
>
> However when defining the component one also has to give the model a 
> “rated source flow rate” and “rated load flow rate” as well as fluid 
> properties on source and load side respectively. This is where I got 
> confused since it does not say if it is in cooling or heating mode.
>
> Best regards
>
> /Mattias Ericsson/
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150326/76742191/attachment-0001.htm>