[TRNSYS-users] Fogging Device - Type 507

[David BRADLEY]

Without seeing the project, it isn't really possible to know what the 
cause is. I would recommend verifying your simulation by using some 
online plotters (Type65) to check the temperature, humidity, and flow 
rate of air as it flows through the system and into the building.
kind regards,
  David


On 3/25/2015 3:26 AM, oshafaamri at yahoo.com wrote:
> Hello,
>
> I have a small building of 1 zone in which i am using shading toldo 
> for more thermal comfort, i also want to include an evaporative cooler 
> (Fogging device) along with the shading, i've defined all the new 
> inputs in the building for the fogging device (%RH, air flow rate and 
> temperature) and connect it to the building, still i get the same 
> operative temperature as with shading only, any idea ?
>
> thanks
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150325/e13782c6/attachment.htm>