[TRNSYS-users] Help

David BRADLEY d.bradley at tess-inc.com
Wed Mar 11 11:25:55 PDT 2015


Avishek
   If you change the overall capacity parameter you also need to change 
the value of various other capacities (such as rated flow rates, 
auxiliary power requirements etc.). Those parameters do not all scale 
linearly (i.e. an absorption chiller that has half the capacity of the 
default one will not require half the cooling water flow for example). 
Also, while your simulation will run and give you results, I would be 
very careful about creating such a small absorption chiller. I am not 
aware of any absorption chillers that have such a small cooling 
capacity. It may be very difficult to find an appropriate set of 
parameters to model such a machine.
regards,
  David


On 3/10/2015 04:50, avishek ray wrote:
>  Hi,
>
> I am a new user of TRNSYS. I am working on vapour absorption systems. 
> In Type 107 can the rated capacity is 425 TR. Can you please tell that 
> just by changing the value to 1 TR can I make it function like a 1 TR 
> system and use it in modelling . Pl help.
>
> Thanks
> Avishek Ray
>
> Research Fellow and Teaching Assistant
> Department of Energy Management
> Indian Institute Of Social Welfare and Business Management; Kolkata-700073
>
> M:9038707191
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150311/c94e7822/attachment.htm>


More information about the TRNSYS-users mailing list