[TRNSYS-users] Multiple Inverters/batteries in a model

[David BRADLEY]

Benjamin,
   Could you please send me the project that you are working from as 
well as any other files that I'd need in order to run the project? 
Please send them just to me and not to the entire mailing list!
kind regards
  David


On 06/29/2015 07:20, Manrique Delgado Benjamin wrote:
>
> Hi,
>
> I am trying to model a PV system and a Wind turbine operating 
> simultaneously, each one with an inverter and battery of its own (48b 
> & 47a). After several trials, I can’t make the inverter control for 
> the low limit on FSOC (going to values as low as -10). I’ve also 
> noticed that making changes on the inverter or battery of one system 
> will affect the results from the other one, which shouldn’t happen as 
> the systems are independent.
>
> Has anyone had this problem before? Any suggestions? I also tried 
> including an Input Value Recall (Type93) but it doesn’t help.
>
> In advance, thank you very much.
>
> Best regards,
>
> Benjamin Manrique Delgado
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150629/c9a32308/attachment-0003.htm>