[TRNSYS-users] solar domestic hot water example diverter

[David BRADLEY]

Benjamin,
  It is not clear from your email which example you are starting from or 
which diverting valve component you are referring to. If you are 
referring to the example in ..\Trnsys17\Examples\ then I would suggest 
that you look at the documentation for Type11 whose algorithms are 
explained in the Type11 section of the 04-MathematicalReference. If you 
are speaking of a different example or if you are trying to use the 
tempering valve controller in the TESS Controls library (Type953) then 
again I would refer you to the documentation of that component. It can 
be found in ..\Trnsys17\Tess 
Models\Documentation\02-ControlsLibraryMathematicalReference.pdf
David



On 06/16/2015 06:19, Benjamin Stobbe wrote:
>
> Thanks Jeff, but how is the contral signal decided how is it 
> calculated so the portion of cold water with the hot water.
>
> Best regards,
>
> Benjamin
>
> *Van:* TRNSYS-users 
> [mailto:trnsys-users-bounces at lists.onebuilding.org] *Namens *Jeff Thornton
> *Verzonden:* dinsdag 16 juni 2015 15:57
> *Aan:* TRNSYS users mailing list at OneBuilding.org
> *Onderwerp:* Re: [TRNSYS-users] solar domestic hot water example diverter
>
> It's a tempering valve to limit the temperature of the water being 
> delivered to the load.  A portion of the  cool mains water bypasses 
> the tank and mixes back in with the hot water leaving the tank.
>
> Jeff Thornton
>
> TESS
>
>
> On Jun 16, 2015, at 1:46 AM, Benjamin Stobbe 
> <benjamin_stobbe at hotmail.com <mailto:benjamin_stobbe at hotmail.com>> wrote:
>
>     Dear sir/madam,
>
>     I am trying to make my own design of a building integrated hybrid
>     photovoltaic system for on a skyscraper. Now you already provide a
>      solar domestic hot water system so I decided to use that as basic
>     and change mine with the help of this one. But one thing I don’t
>     understand is how the diverter works. You have your load profile
>     and then you let It go through the diverter, who seperates it into
>     two flow one to the tee piece and one to the tank. Me is not
>     totally clear how it is decided when it goes to the tank or when
>     to the Tee Piece. I found out about the control signal but I
>     monitored this one as well but did not understand how it is
>     calculated because the formula in the small description is wrong.
>
>     I hope someone can help me and I don’t understand why the diverter
>     is needed. Why will the load profile not go directly to the tank I
>     expected that is was actually a control signal or data line but
>     here is looks a flow.
>
>     I hope to hear from you soon.
>
>     Best regards,
>
>     Benjamin Stobbe
>
>     _______________________________________________
>     TRNSYS-users mailing list
>     TRNSYS-users at lists.onebuilding.org
>     <mailto:TRNSYS-users at lists.onebuilding.org>
>     http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150616/1d2067a6/attachment-0003.htm>