[TRNSYS-users] TRNSYS-users Digest, Vol 126, Issue 20

[David BRADLEY]

Niket,
   If you are using the most recent TRNSYS release (17.02.0004) then you 
will find Trnsys3d plugin installs for various versions of SketchUp in 
the ..\trnsys17\Tools directory. For SketchUp 8, you will need to use 
the install called trnsys3d_e_setup_v1_0_7_SketchUp8_2013.exe. Please 
note that the plugin only functions with the 32-bit version of SketchUp.

  The plugin is functionally exactly the same for all versions of 
SketchUp. The difference lies only in where the plugin is installed. If 
you continue to get errors once you have migrated to the more recent 
SketchUp version then I would recommend you contact your distributor's 
technical support and give them a clear indication of what the errors are.

Kind regards,
  David


On 06/15/2015 01:09, Niket Kumar wrote:
> Dear Sir/Madam,
>
> I had installed TRNSYS 17 with google skecthup version 7.0, but now I 
> want to upgrade it to higher version like 8.0.
>
> Is there a option to upgrade the google sketchup with the plugin of 
> TRNSYS 3d ?
>
> Actually, I found errors in running a *.idf file which was developed 
> with skecthup 8.0. I am using sketchup 7.0 with TRNSYS plugin.
>
> Please let me know How can I do this.
>
> regards,
>
> Niket Kumar
> Indian Institute Of Technology Kanpur,
> Kanpur,U.P-208016,India.
>
> On Mon, Jun 15, 2015 at 1:37 AM, 
> <trnsys-users-request at lists.onebuilding.org 
> <mailto:trnsys-users-request at lists.onebuilding.org>> wrote:
>
>     Send TRNSYS-users mailing list submissions to
>     trnsys-users at lists.onebuilding.org
>     <mailto:trnsys-users at lists.onebuilding.org>
>
>     To subscribe or unsubscribe via the World Wide Web, visit
>     http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>     or, via email, send a message with subject or body 'help' to
>     trnsys-users-request at lists.onebuilding.org
>     <mailto:trnsys-users-request at lists.onebuilding.org>
>
>     You can reach the person managing the list at
>     trnsys-users-owner at lists.onebuilding.org
>     <mailto:trnsys-users-owner at lists.onebuilding.org>
>
>     When replying, please edit your Subject line so it is more specific
>     than "Re: Contents of TRNSYS-users digest..."
>
>     Today's Topics:
>
>        1. Tank Temperature Beyond Boiling (Bradley Painting)
>        2. About TRNSYS (Kenza Ferradji)
>        3. Humidity capacitance (Ayesha Mohammed Al Qubaisi)
>
>
>     ---------- Forwarded message ----------
>     From: Bradley Painting <paintingbr at email.appstate.edu
>     <mailto:paintingbr at email.appstate.edu>>
>     To: trnsys-users at lists.onebuilding.org
>     <mailto:trnsys-users at lists.onebuilding.org>
>     Cc:
>     Date: Sat, 13 Jun 2015 23:12:58 -0400
>     Subject: [TRNSYS-users] Tank Temperature Beyond Boiling
>     Hi,
>
>     Does anyone know how to limit the fluid temperature of the
>     vertical cylindrical tank 534-coiled (from TESS library)? It is
>     getting up to about 130 °C. I can't find a parameter to limit
>     this. I was using Type 60c but ran into a bug and technical
>     support suggested I use this model because it has fewer issues.
>     -- 
>
>     Brad Painting
>
>     Master of Science Candidate, Renewable Energy Engineering
>
>     Department of Technology & Environmental Design
>
>     Appalachian State University
>
>     Boone, NC  28608
>
>
>
>     ---------- Forwarded message ----------
>     From: Kenza Ferradji <kenzo-archi at live.fr
>     <mailto:kenzo-archi at live.fr>>
>     To: "trnsys-users at lists.onebuilding.org
>     <mailto:trnsys-users at lists.onebuilding.org>"
>     <trnsys-users at lists.onebuilding.org
>     <mailto:trnsys-users at lists.onebuilding.org>>
>     Cc:
>     Date: Sun, 14 Jun 2015 12:10:41 +0100
>     Subject: [TRNSYS-users] About TRNSYS
>
>     I want to say how replace type 15 by type 9 and type 16 for
>     simulation.
>
>     When I enter .idf file to TRNSYS I have a message "adj wall not
>     found" what can I do to avoid it.
>
>
>
>     ---------- Forwarded message ----------
>     From: Ayesha Mohammed Al Qubaisi <aalqubaisi at pi.ac.ae
>     <mailto:aalqubaisi at pi.ac.ae>>
>     To: "trnsys-users at lists.onebuilding.org
>     <mailto:trnsys-users at lists.onebuilding.org>"
>     <trnsys-users at lists.onebuilding.org
>     <mailto:trnsys-users at lists.onebuilding.org>>
>     Cc:
>     Date: Sun, 14 Jun 2015 11:34:16 +0000
>     Subject: [TRNSYS-users] Humidity capacitance
>
>     Dear all,
>
>     I get very low humidity ratio when I run TRNSYS for building.
>
>     Does that have any relation with humidity capacity value inside
>     TRNbuilt?
>
>     I set it as 5. Should I increase it?
>
>     Thanks and regards,
>
>     Ayesha
>
>
>     _______________________________________________
>     TRNSYS-users mailing list
>     TRNSYS-users at lists.onebuilding.org
>     <mailto:TRNSYS-users at lists.onebuilding.org>
>     http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150615/25aa861f/attachment-0003.htm>