[TRNSYS-users] PV inverter (Type 48a) to link with hot water tank (Type 534)

[Anas Majdouli]

Hi TRNsys community,

For my project, I need to simulate a case : 
DHW production using PV panel electricity output as an input for the 
auxiliary heating within the tank. I added also an electric aux. heater 
on the top of the tank to reach the set point temperature (45°C). The 
TRNsys file is attached to this email. 

I am requesting for your 
help, because the simulation doesn't seem working. I think the problem 
comes from the inverter. Maybe I haven't linked it correctly to the tank
 or to the PV panel. Could you help me please ?

Thanks in advance.

Yours Sincerely,
Anas MAJDOULI 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150608/b7e74c58/attachment-0003.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PV + tank bis (all types from TESS).dck
Type: application/octet-stream
Size: 15345 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150608/b7e74c58/attachment-0006.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PV + tank bis (all types from TESS).tpf
Type: application/octet-stream
Size: 204540 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150608/b7e74c58/attachment-0007.obj>