[TRNSYS-users] Modelling- Building

David BRADLEY d.bradley at tess-inc.com
Mon Jun 1 14:29:33 PDT 2015


Saif,
  There is a "virtual window" in the TRNBuild window libraries that you 
can use. Defining the airflow that occurs through such windows is not 
obvious and is best done by coupling your TRNSYS simulation with either 
a TRNFlow/COMIS simulation or with a CONTAM simulation.
kind regards,
  David


On 5/27/2015 8:45 AM, Saif Rashid wrote:
> I am trying to model a Reed House the problem is that the house has no 
> real windows (with frames and glazing) it has only openings for 
> natural lighting and ventilation (see attached photos). The Building 
> is basically not 100% closed.
> The question is whether to define these openings as windows, if yes 
> how to define the windows' properties and if  not how to calculate the 
> ventilation and solar gains.
>
> thanks a lot
>
> Best Regards/ Mit bestem Gruß
>
> Saif Rashid- Room 212
> Paul-Ehrlich-Straße- Building 29
> 67663 Kaiserslautern
> Germany
> Tel. +49 (0) 631/ 205-5467
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150601/804a0396/attachment-0003.htm>


More information about the TRNSYS-users mailing list