[TRNSYS-users] solar domestic hot water example diverter

[Benjamin Stobbe]

Dear sir/madam,

 

I am trying to make my own design of a building integrated hybrid
photovoltaic system for on a skyscraper. Now you already provide a  solar
domestic hot water system so I decided to use that as basic and change mine
with the help of this one. But one thing I don't understand is how the
diverter works. You have your load profile and then you let It go through
the diverter, who seperates it into two flow one to the tee piece and one to
the tank. Me is not totally clear how it is decided when it goes to the tank
or when to the Tee Piece. I found out about the control signal but I
monitored this one as well but did not understand how it is calculated
because the formula in the small description is wrong.

 

I hope someone can help me and I don't understand why the diverter is
needed. Why will the load profile not go directly to the tank I expected
that is was actually a control signal or data line but here is looks a flow.

 

I hope to hear from you soon.

 

Best regards,

 

Benjamin Stobbe

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150616/7dc3e0f8/attachment.htm>