[TRNSYS-users] Weather Data parameters

[Arnaud Candaele]

Hi all,

I have a problem regarding the Weather Data parameters.
Basically, in these parameters, I define a certain number of surfaces, say
7. What it does is automatically create a number of additional parameters,
for each surface :

   - tracking mode-#
   - Slope of surface #

...and the last parameter is "Azimuth of surface", which appears only that
one time, and not for every surface as I would expect.
So, this gives me 21 parameters. When I launch the computation I get an
error saying the unit 15 (Weather Data) requires 27 parameters and only 21
are specified... which makes perfect sense, but ..why is Simulation Studio
not giving me these 27 parameters ?? What can I do ?

If I correct manually the deck file, and specify these 27 parameters, then
run in batch (without going through Simulation Studio), it works fine...

Thanks for your help !

Arnaud.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150707/a5b7c6ef/attachment-0003.htm>