[TRNSYS-users] OUT array location error

[Bharath Seshadri]

Dear Fellow TRNSYS-users,

Has anyone come across this error "An OUTPUT from the specified component model has been written to the global OUT array in a location beyond the allocated number of outputs from the model. Please check the component carefully to ensure that INFO(6) is set correctly. The simulation has been aborted to avoid problems caused by over-writing the outputs from other component models". The component in question is a type 110 variable flow pump.

Greatly appreciate your advice/inputs. Thank you!
Bests, Bharath

Bharath Seshadri (Mr)| Research Associate | Energy Research Institute @ NTU (ERI at N) | Nanyang Technological University, 1 Cleantech Loop, #06-09, CleanTech One, Singapore 637141 (Map)<http://erian.ntu.edu.sg/ContactUs/Documents/CT%20One%20Map_visitors.pdf> | Mob: (65) 9663-5165 Tel: (65) 6592-3284 GMT+8h | Fax: (65) 6694-6217 | Email: s.bharath at ntu.edu.sg<mailto:s.bharath at ntu.edu.sg> | Web: www.ntu.edu.sg<http://www.ntu.edu.sg/> & http://erian.ntu.edu.sg<http://erian.ntu.edu.sg/>

[SG50]
________________________________
CONFIDENTIALITY: This email is intended solely for the person(s) named and may be confidential and/or privileged. If you are not the intended recipient, please delete it, notify us and do not copy, use, or disclose its contents.
Towards a sustainable earth: Print only when necessary. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150724/29b719fc/attachment.htm>