[TRNSYS-users] Determining TrnBuild Boundary temperatures in boundary type.

mcdowell at tess-inc.com mcdowell at tess-inc.com
Thu Jul 2 13:59:16 PDT 2015


 

Muhammad Talha - 

Identical means that the back surface temperature is the same as the
front surface temperature. 

Userdefined means that the back surface temperature will be set by the
user, either as a constant or as an input. 

Regards, 

Tim 

---
Timothy P. McDowell
Executive Vice President
Thermal Energy System Specialists, LLC
22 N Carroll St, Suite 370
Madison, WI 53703
608-274-2577

On 2015-07-02 15:30, Muhammad Talha wrote: 

> Dear TRNSYS users, 
> 
> Is there a way to determine the boundary temperature in the boundary type in TrnBuild. I am using the boundary as category for floor but can't comprehend what identical means. I want to determine heat loss through the floor of my building. 
> 
> Mohammad Talha 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [1]
 

Links:
------
[1]
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150702/ccaa3598/attachment.htm>


More information about the TRNSYS-users mailing list