[TRNSYS-users] Problems with Cooling Type Manager/Maximum above temperature
olenienaber at web.de
Wed Jan 28 08:37:13 PST 2015
thank you very much for this quite simple and good idea.
How can I modify my schedule in the Cooling Type Manager the way you
showed me? Or can I edit the .inf-File?
Am 28.01.2015 um 14:13 schrieb Jeff Thornton:
> Use a slightly different equation;
> Tset = 24 * SCHED + 99 * (1 - SCHED)
> Jeff Thornton
>> On Jan 28, 2015, at 5:35 AM, Ole Nienaber <olenienaber at web.de> wrote:
>> Dear All,
>> I'm new here.
>> I have a problem with the cooling demand of a building zone.
>> I use the Cooling Type Manager to regulate my maximum temperature (24°c) in the zone. Also I use a schedule, because cooling isn't ON all the time.
>> So my formula for the Cooling Type Manager is: 24*SCHED+0. And here is the problem. If my schedule is OFF (=0), than, of course, the cooling cools down my room temperature on 0°C. But I just want control, that the room temperature never increase over 24°C. Is there another way I could do it?
>> Thanks a lot and I hope you all understand the problem.
>> TRNSYS-users mailing list
>> TRNSYS-users at lists.onebuilding.org
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
More information about the TRNSYS-users