[TRNSYS-users] Capacitance in TRNBuild

[jeannieboef at gmail.com]

You need to think about the flux (how fast the thermal storage can be  
loaded and unloaded) and which mechanisms deturmine this. Is it  
appropriate?

Mit freundlichen Grüßen- Sent from my iPhone (excuse the brevity)

i. A.
Jean Marais
b.i.g. bechtold
Tel.   +49 30 6706662-23

On 22.02.2015, at 13:01, Ole Nienaber <olenienaber at web.de> wrote:

> Dear all,
>
> I'm trying to model a building zone in TRNBuild. The store capacity  
> is specified by 90 Wh/(m²*K). Unfortunately there is no information  
> about the single store capacities (e.g. walls, furniture,...). Now m 
> y idea was to just model the zone with massless walls and to add the 
>  whole store capacity to the capacity in TRNBuild (normally the wall 
>  capacity is not valued in this parameter). Normally I don't see any 
>  problems regarding to this way of calculation, becauce I only use t 
> he absolute value of the capacity. Do you see any problems in doing  
> this?
>
> Thanks and greets,
> Ole
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org