[TRNSYS-users] Radiant Heating System

[David BRADLEY]

Bianca,
  It does not sound from your description as though there is any 
connection back from the radiator to the building. The energy output of 
the radiator needs to be an energy input into the zone in order for the 
zone temperature to increase because of the radiator.
regards
  David




On 2/19/2015 04:48, B. Marwaha wrote:
> Hi,
>
> I am trying to model a radiant heating system for a university 
> building. I have used a Type 700 boiler connect to a Type 1231 
> radiator and then connect the radiator to my Type 56 building. I have 
> linked the 'Room temperature' output of the radiator to the zone in 
> the building which I want to heat up. My problem is that the internal 
> zone temperature is not changing even though I am changing the inlet 
> water temperature to the radiator, and thus the surface temperature.
> Does the room temperature link to the zone not cause the zone to 
> change temperature? I am not sure what else to connect or whether I 
> require another component to cause the temperature to change?
>
> I cannot seem to find any examples with radiators so any advice would 
> be very much appreciated!
>
> Thank you!
>
> Kind regards,
>
> Bianca
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com