[TRNSYS-users] Changing the max of a parameter

mcdowell at tess-inc.com mcdowell at tess-inc.com
Tue Dec 1 14:07:05 PST 2015


 

Brendan - 

You need to replace the component in your project with the new proforma.
Right-click on the component, select replace and then select the new
proforma that you have created. 

Regards, 

Tim 

---
Timothy P. McDowell
Executive Vice President
Thermal Energy System Specialists, LLC
22 N Carroll St, Suite 370
Madison, WI 53703
608-274-2577

On 2015-12-01 15:41, Brendan McCormick wrote: 

> Hello TRNSYS users, 
> 
> Could anyone advise me on how to change the max value for a parameter? I have opened the type proforma (Type160c), and under the 'variables' tab changed the max value of my intended parameter (IDMAX). When I return to the assembly window and double click the type the required changes are not there. However, back in the proforma the changes are saved. 
> 
> Has anyone encountered this issue? 
> 
> Cheers, 
> 
> Brendan 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [1]
 

Links:
------
[1]
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20151201/f5856cef/attachment-0003.htm>


More information about the TRNSYS-users mailing list