[TRNSYS-users] About Type4e

[Anas Majdouli]

Hi TRNsys community,

I started learning TRNsys last week for my internship.
I am trying to use the Type4e (Hot water storage tank) to produce DHW, following a daytime strategy (a load profile, using Type14b) to heat water from 29°C to 45°C. The file is attached to this mail.

It seems that the simulation is not working : Q=0 kJ/hr. Can you help me with it ? Am I plotting the wrong output ? Do I need to add an electricity heater before the tank to heat water OR is it included in the type ?

Thanks in advance.

Anas MAJDOULI
The Solar Energy Research Institute of Singapore - Intern
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150429/f1156c51/attachment-0003.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Hot water storage tank Final (elec).dck
Type: application/octet-stream
Size: 6015 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150429/f1156c51/attachment-0006.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Hot water storage tank Final (elec).tpf
Type: application/octet-stream
Size: 90860 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150429/f1156c51/attachment-0007.obj>