[TRNSYS-users] Genopt trnbuild error

[mcdowell at tess-inc.com]

Martin Berov - 

It is not finding your building model file when it starts the
simulation. GenOpt moves the files to run a simulation so you need to
make sure all paths for files are complete. 

Regards, 

Tim 

---
Timothy P. McDowell
Executive Vice President
Thermal Energy System Specialists, LLC
22 N Carroll St, Suite 370
Madison, WI 53703
608-274-2577

On 2015-04-14 14:06, Martin Berov wrote: 

> Hi, 
> 
> I'm using Genopt to optimize parameters of solar heating system (first just the collector area and slope). I compiled the input file, defined the variables in genopt i.e. everything as required. bu when I run the optimization i get error message as table where is written: 
> 
> Trnbuild 
> Surf-No Description Comment 
> -1 no OUTPUT's specified please add at least one output 
> 
> In the Trnsys simulation environment I get output results (the model is properly functioning) 
> 
> Do you have idea what could be the problem? 
> 
> Best Regards 
> Martin 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [1]
 

Links:
------
[1]
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150415/df996091/attachment-0003.htm>