[TRNSYS-users] RH and T type 651

[David BRADLEY]

Aisha,
   It is not possible to determine the reasons for the system behavior 
without the project and building files. Please send these files to your 
distributor for assistance.
regards,
  David


On 4/13/2015 4:18 AM, Ayesha Mohammed Al Qubaisi wrote:
>
> Dear All,
>
> Im using AC type 651 with type 56 building component.
>
> However, attached are two graphs which shows T and RH for 9 zones.
>
> 1)Does anyone knows why the AC is not working during the first 25hrs ?
>
> 2)Also why this high jump in humidity at the initial time of simulation?
>
> 3)Somehow zone 3 is falling out the limits of T and RH although it has 
> same inputs as others. Any idea?
>
> Most of the ACs uses 1 ton cooling from the supplied TRNSYS 
> performance data. The simulation time step is 5mins.
>
> Thanks and regards,
>
> Aisha
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150413/dff431e7/attachment-0003.htm>