[TRNSYS-users] Hybrid Wind-PV system

[David BRADLEY]

Farah,
   The operation mode of the battery and the operation mode of the 
regulator need to match one another. If you have not been able to 
determine the cause of the issue then please send your simulation to 
your distributor for assistance.
kind regards,
  David


On 4/6/2015 8:33 AM, Farah KOJOK wrote:
>
> Dear Sir,
>
> I try to simulate a hybrid wind-photovoltaic system where electric 
> energy is stocked in a battery.
>
> I linked the sum of outlet power from both Wind and PV units to a 
> regulator, which is connected to the battery.
>
> However, I find that, at each instant, the power of battery (Output 3 
> in Type 47) is equal to the sum mentioned above and that there is no 
> storage of free electrical energy. In addition, I would like to note 
> that the battery state of charge increases with time.
>
> Thank you for your help.
>
> Best Regards
>
> Farah
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150413/444e514c/attachment-0003.htm>