[TRNSYS-users] type 1288 : evacuated collector or linear Fresnel

[Jeff Thornton]

Type 1288 can model a host of collector technologies with 2-dimensional incidence angle modifiers - including evacuated tubes and Fresnel collectors.  There is nothing wrong with the installation.

Jeff Thornton
TESS

Sent from my iPhone

> On Apr 1, 2015, at 4:56 PM, Nidal Abdalla <nidalabdalla at yahoo.com> wrote:
> 
> Dear All
> 
> I am using TRNSYS 17.02 with TESS. I am trying to use evacuated tube collector type 1288, but I found that Linear Fresnel Collector has also type number 1288 . Both components use the same source code. I copy the proforma of these components as follow:
> 
> "Generic Solar Collector Model Using the EN12975-2 Efficiency Approach - 2D IAMs
> Tess Models\SourceCode\Type1288.f90"
>  
> "Linear Fresnel Collector using the EN12975-2 Efficiency Approach
> Tess Models\SourceCode\Type1288.f90"
>  
> My question is :  Which component uses the correct source code?
> Do you think that this problem appeared due to trouble in installing TESS in my PC?
> 
> Best regards
> 
> Nidal Abdalla
> 
> NERC - Amman - Jordan
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150401/e3c8004d/attachment-0003.htm>