[TRNSYS-users] Type651 evaporator flowrate

[Jeff Thornton]

You would set the evaporator flow rate to the flow rate of cool air that
the device provides to the zone. This value will be dependent on the
size of the AC unit that you choose. 

jeff 

---
Jeff Thornton
President - TESS LLC
22 N. Carroll Street, Madison WI USA 53703
Office: (608) 274-2577 Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton at tess-inc.com

On 04/09/2015 8:55 am, A. M wrote: 

> Dear All, 
> 
> Im using type651 air conditioner. Im only want to cool the house. Therefore, Im using this type alone. 
> This component has " Evaporator flow rate" as an input. Any idea how to define this value ? 
> 
> The external data file for 1 ton cooling coil was chosen for this type. The limits of evaporator air flow rate in this data file is given between 330~472 (L/s). 
> 
> Should i choose a value between this limit ? 
> 
> Meer 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [1]
 

Links:
------
[1]
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150409/a284fb29/attachment.htm>