[TRNSYS-users] TESS DLLs not found

[David BRADLEY]

Zouhour,
   Those are not errors; they are notices, which are designed to simply 
give you information. If the simulation stopped and told you that there 
is an error then filter the error messages on "fatal" and look only at 
errors (i.e. not warnings and not notices.)
Regards,
  David


On 10/9/2014 08:13, zouhour sayadi wrote:
> I'm have recently installed TESS libraries for TRNSYS17. When I run a 
> TESS example, many errors such as those described as follows occurs.
>
> TESSApplicationsLibrary_v17.1.03_Debug.dll" was found but did not 
> contain any components from the input file.
> TESSArchiveDLL_v2.04_Debug.dll" was found but did not contain any 
> components from the input file.
>
> I verified that "TESSApplicationsLibrary_v17.1.03_Debug.dll" for 
> exemple is in the userlib/debug folder.
>
> I can't find the solution.
>
> Thanks in advance
>
> Best regards.
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20141009/e9059353/attachment.htm>