[TRNSYS-users] Problem with window in TRNbuild

[jeannieboef at gmail.com]

In short, no, I don't think so and I wouldn't hope so.

I suggest using WINDOW. Afterward, you will see that your request is  
strange in that their should be no reason to try and simulate  
something that does not or cannot exist with a simulation program  
trying to align itself with reality. Sorry if my response sounds  
harsh...it is only meant to encourage you to think a little into the  
physics underlaying the models.

PS Their is plenty more than the reflectivity that influences heat  
gain/loss through and by the glass and window assembly.

Mit freundlichen Grüßen- Sent from my iPhone (excuse the brevity)

i. A.
Jean Marais
b.i.g. bechtold
Tel.   +49 30 6706662-23

On 19.08.2014, at 10:51, Nikolaos Skandalos <nskandalos at upatras.gr>  
wrote:

> Dear TRNSYS users,
> I used type 56 to model an office with external windows. Apart from  
> using WINDOW software, is there any idea of how can I adjust the  
> reflectivity of the window (from 0 to 100% with 10% steps) ? I want  
> to investigate if there is an influence on the air temperature of  
> the office.
>
> Best regards,
>
> Nikolaos Skandalos
>
> University of Patras
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org