[TRNSYS-users] Simulatoin Error

[Omar Abu-Hamdeh]

Dear All,



I have recently added layers, gains, heating, cooling, and infiltration to my type 56 building. The simulation would run fine before I added these. Now, when I run the simulation I get an error that says the following:



                           Release 17.01.0028

Simulation log for: "E:\RESEARCH\UPDATED FINISHED BUILDING\Building_imported.dck"

*** Notice at time        :         0.000000
    Generated by Unit     : Not applicable or not available
    Generated by Type     : Not applicable or not available
    Message               : The TRNSYS Executable (TRNExe.exe) and main DLL (TRNDll.dll) are located in "C:\Software\Trnsys17\Exe"

*** Fatal Error at time   :         0.000000
    Generated by Unit     : Not applicable or not available
    Generated by Type     : Not applicable or not available
    TRNSYS Message    350 : Unable to open the file associated with an ASSIGNED logical unit number. Please check the ASSIGN statement and make sure that the file exists at the specified location
    Reported information  : Logical Unit =     31, FileName = D:\RESEARCH\UPDATED FINISHED BUILDING\Building.b17

*** Simulation stopped with errors
    Total Notices         :         1
    Total Warnings        :         0
    Total Fatal Errors    :         1



Any help would be appreciated.



Omar

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140804/2d427902/attachment.htm>