[TRNSYS-users] shady place simulation

[Karol BANDURSKI]

Dear Users and Developers,

 

I would like to model the zone that envelope is 'fully of holes', it
consists of only shading elements. Like space inside upper branches of a
tree or in the forest. 

 

So, there is no thermal insulation and air and heat can flow into and across
zone by natural ventilation, but sun radiation is limited.

 

I wonder if TRNSYS simulation (TRNBUILD+TRNFLOW) can be appropriate to model
such objects (inside thermal comfort) or it is necessary to use CFD
simulation.

 

I think to prepare zone (maybe a few airnodes) with very low thermal
resistance (or thermal properties of construction material, e.g. steel) and
with a lot of cracks in the walls, then to model shading elements using
shading zones.

 

Do you have some idea or some experience with such objects?

Any comments, hints and tips are appreciated!

 

Kind regards,

Karol

------------------------------------------------

Karol Bandurski MSc.

 <http://www.ee.put.poznan.pl/> Institute of Environmental Engineering

Poznan University of Technology

 <http://www.put.poznan.pl/~karol.bandurski>
www.put.poznan.pl/~karol.bandurski

www.ee.put.poznan.pl <http://www.ee.put.poznan.pl/> 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140613/35e6dbb9/attachment.htm>