[TRNSYS-users] Weather_data

[David BRADLEY]

George,
   TRNSYS reads Meteonorm data files that have been saved in the *.tm2 
(Typical Meteorological Year version 2) file format. If you have file in 
*.tm2 format generated by Meteonorm then Type15-6 is the correct 
component to use to read it. If you are getting an error then please 
email your project and your weather file to your distributor.
Best,
  David

PS in case you didn't find them, a number of Meteonorm-generated 
European weather files already saved in the *.tm2 format are available 
in the TRNSYS weather archive which can be downloaded from: 
http://sel.me.wisc.edu/trnsys/user17-resources/index.html


On 10/5/2014 08:30, george orestides wrote:
> Hello everyone,
>
> I am trying to use weather data from meteonorm files, so I added the 
> type15-6 weather data processor.
> Everything seems running fine except when I use a weather data file 
> from Europe.
> Could anyone tell me which weather data processor should i use?
>
> Thank you in advance,
> George Orestidis
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20141006/5c555a7d/attachment-0004.htm>