[TRNSYS-users] Range Check Error "unable to find fluid data file"

[Omar Abu-Hamdeh]

It is probably talking about the external file. Double click the type, go to the 'external files' tab, and browse for the file.


Omar

________________________________
From: TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> on behalf of Yosr ALLOUCHE <allouche.yosr at gmail.com>
Sent: Wednesday, November 19, 2014 10:09 AM
To: TRNSYS users mailing list at OneBuilding.org
Cc: trnsys-users at cae.wisc.edu
Subject: Re: [TRNSYS-users] Range Check Error "unable to find fluid data file"

Hi Heidi,

I am facing exactly the same problem in the same time as you!! we keep working on it, we keep in touch if one of us finds the solution

Good luck

2014-11-19 15:18 GMT+00:00 Heidi El Zanaty <hzanaty at gmail.com<mailto:hzanaty at gmail.com>>:
Hi All,

I'm trying to run a simulation for a project containing type 840. But, I get a range check error showing "unable to find fluid data file" for TYPE 840.
Does anyone have a solution for this?

Thanks
Heidi El Zanaty
Graduate Student at the American University in Cairo

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org<mailto:TRNSYS-users at lists.onebuilding.org>
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org




--
 Yosr ALLOUCHE
Energy Engineer / PhD Student
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20141119/88b6fa9f/attachment-0004.htm>