[TRNSYS-users] heat pipe

[Jeff Thornton]

It depends on how you'd like to model the collector. If the collector
has been tested to one of the common standards (EN12975-2 for example),
then it can be readily modeled in TRNSYS. If you are looking for a
detailed physics-based first principles model of a concentrating heat
pipe collector, I am not aware of one. 

Jeff 

---
Jeff Thornton
President - TESS LLC
22 N. Carroll Street, Madison WI USA 53703
Office: (608) 274-2577 Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton at tess-inc.com

On 05/19/2014 11:09 am, mohameed alsamareey wrote: 

> Dear for all 
> I would like to know , is TRNSYS solve parabolic trough solar collector with heat pipe? 
> i mean that the heat pipe is consist two part (evaporator+condenser), theromsyphon occurs in the heat pipe 
> the heat pipe places in the focal line of the parabolic 
> Many Thanks 
> Mohammed 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users [1]
 

Links:
------
[1] https://mailman.cae.wisc.edu/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140519/32037252/attachment-0004.htm>