[TRNSYS-users] regarding problem in Photovoltaic operated air conditioning

Bachchulal Gupta blgbharatpur at gmail.com
Fri May 2 09:44:11 PDT 2014


dear all
i am simulating a Five zone office building operated Monday - Friday 9AM to
6 PM
the cooling load was already calculated .
at present i am air conditioning East zone through ventilation by a
packaged terminal air conditioning ,the air conditioner is power by
photovoltaic panel via inverter regulator and battery bank .
various equation are made for signals of schedule alog with thermostat

temperature was maintained at pre defined value , but my problem is that
air conditioners was operated even very low panel wattage and low battery
AH, while no any grid power was taken by a large AC even 100W panel is
attached
while i was already simulated a refrigerator in that case when power from
solar / battery / panel is low then it will take grid powers
pls see and suggest what can i do
regards
B.L.Gupta
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140502/4e20ba09/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: BLG_AC.b17
Type: application/octet-stream
Size: 80631 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140502/4e20ba09/attachment-0002.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 121211_Refrigerator_v2.tpf
Type: application/octet-stream
Size: 319687 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140502/4e20ba09/attachment-0003.obj>


More information about the TRNSYS-users mailing list