[TRNSYS-users] ready example of ground-source heat pump

David BRADLEY d.bradley at tess-inc.com
Wed Mar 26 07:54:34 PDT 2014


Kent,
   I think those examples are too basic for what you are trying to do 
although they might serve as a starting point. They basically have no 
controls in them at all. You would also need to use Type682 or Type693 
from the TESS Loads and Structures library in order to impose your 
precalculated loads on the heat pumps.
Kind regards,
  David


On 3/25/2014 11:00, Kent Beason wrote:
>
> I found an archived message from Aug 2012 that is closely related to a 
> simulation I'm working on:
>
> ***
>
> Dear Aigerim,
>
>    You will almost surely need to have access to the TESS GHP Library in
>
> order to carry out your study. If you do and if you are using Trnsys17,
>
> then look at the GHP example that is in the ..\Trnsys17\TESS
>
> Models\Examples\GHP Library\. It uses water-to-water heat pumps instead
>
> of the more common water-source heat pumps but it will give you a good
>
> idea of how to set up the ground loop. The water-source heat pump then
>
> gets connected to a ventilation type within Type56.
>
>    If you are using Trnsys16 then loop at the GHP example that is in
>
> ..\Trnsys16\Tess Models\Studio Projects\Geothermal Heat Pump Library\.
>
> This is an example of a water-source heat pump that is connected to a
>
> steady stream of constant condition air. The air is cooled based only on
>
> an on/off timer. The timer would be replaced by a thermostat model and
>
> the constant condition inlet air would be replaced by a connection from
>
> the building.
>
> Kind regards,
>
>   David
>
> ***
>
> Can this model further be used for reading building loads (externally 
> generated) into the heat pump type?  I'm using HyGCHP
>
> for comparing different hybrid configurations, but want to examine 
> different pumping configurations as well and looking at this
>
> example file as a starting point for that comparison.
>
> Sincerely,
>
> Kent Beason, PE, LEED AP
>
> Estes, McClure & Associates, Inc.
>
> 3608 West Way
>
> Tyler, TX 75703­
>
> ------------------------
>
> office - 903 581 2721
>
> cell - 830 609 8904
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140326/9b89d7e8/attachment-0004.htm>


More information about the TRNSYS-users mailing list