[TRNSYS-users] Tank stratification

David BRADLEY d.bradley at tess-inc.com
Wed Mar 12 11:44:10 PDT 2014


Igor,
   Type4 takes the tank volume and the height of each tank node as 
parameters. You'll find one "height of node-X" parameter for each node 
that you specify. The model calculates the tank diameter from the volume 
and the overall height (the sum of the node heights).
Regards,
  David


On 3/8/2014 14:32, Igor Seso wrote:
> Hi to all users,
>
> In my simulations I'm using stratified tank Type 4c but I/m not clear 
> how does it account for the stratification when it does not require 
> the tank dimensions - diameter and height which I think directly 
> influence the stratification ?
>
> Can someone give me short explanation or suggest how can I analyze the 
> stratification in regard of geometry?
>
> Best Regards
> Igor
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140312/c5b72416/attachment-0004.htm>


More information about the TRNSYS-users mailing list