[TRNSYS-users] Heating/cooling energy consumption

[David BRADLEY]

Igor,
   Yes, you care correct on both counts. You can also ask Type56 to give 
you QCOOL as an output if you want to know cooling loads. Keep in mind 
that the loads are sensible only and that no latent loads are calculated 
unless you have activated either humidification or dehumidication in a zone.
Kind regards,
  David


On 2/26/2014 07:22, Igor Seso wrote:
> Dear all,
>
> I want to simulate/calculate the heat energy consumption of a building 
> Type 56 (weekly,monthly).
>
> 1.Since as output from the TYPE 56 I get only the Qheat_zone(heat 
> transfer rate-power) so will it be correct to use the quantity 
> integrator type 24 and connect with Type 46?
> 2. For the integration period if I put 24 hr does it mean that I get 
> daily energy consumption? and with STOP I get for the whole simulation 
> period?
>
> Thank you
> Best Regards
> Igor
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140303/c4e4d48a/attachment-0001.htm>