[TRNSYS-users] type 71 evacuated collector: problem with radiation on 24 hr

[Giuseppe Filippini]

Dear TRNSYS-users,

I simulated my model with TYPE 71,3,4,9,15 and plotter Type 65 (more
information in attachement);

My time simulation consists in:

TIME STOP: 24hr

TIME STEP: 1hr

And my data reader type 9e reads 24 values of Total Radiation (as a
particular day with 24 hr of continuity total radiation) ;

so my problems are:

1. How can I obtain inlet/outlet temperature (in a plotter) from the
collector, without the difference between daytime and nighttime of the
collector?

2. How can I write "Total Radiation data file" in a component to read
them in seconds (and not in hours) by the collector TYPE 71?

Best regards.

Giuseppe
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140627/26f19dc9/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: GRAFICO SIMULAZIONE.png
Type: image/png
Size: 152589 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140627/26f19dc9/attachment-0010.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SIMULATION.png
Type: image/png
Size: 201185 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140627/26f19dc9/attachment-0011.png>