[TRNSYS-users] Tempering valve type11b (mode5)

[David BRADLEY]

Shahen,
   Your understanding is correct.
Best,
  David



On 7/4/2014 03:06, Shahen Fakhraldin wrote:
>
>
>
> Hi all,
>
> Can anyone correct me if I was wrong please
>
> I am using type11b (mode 5) like as it has been used in the figure 
> [4.6.2--4: Example of Tempering Valve Use] page 4-182 in ch4 of TRNSYS 
> manual, and I summarized what I understood in three points:
>
> 1- if T h<T set and T i>T h =======then flow will be through the outlet 2.
> 2- if T h<T set but T i<T h======= then the flow will be though the 
> outlet 1.
> 3- if T h>T set and either Ti>T h or T i<T h ============then flow 
> will be through the outlet 1
> Am I right? (I am not sure about point 2)
>
> Kind regards,
> Shahen
> /
>
> /
>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140707/05b5907b/attachment-0004.htm>