[TRNSYS-users] Fwd: Thermostat is not working properly

[Abhay Pratap Singh]

Hi Trnsys users,
I had attached a Simple thermostat to a building and my puprpose is to
controls the signal of fan coil unit. I am taking 23.5 deg C as a
setpoint and deadband of 1 deg C. In the start of the simulation it
works properly but in between of simulation it is not working.
I am attaching an excel file of results which shows room air
temperature and fan coil unit signal. So, please help me out.

Thanks for any help in this regard.


-- 
With regards,
Abhay Pratap Singh
MNIT, Jaipur
-------------- next part --------------
A non-text attachment was scrubbed...
Name: FCU Signals.xlsx
Type: application/vnd.openxmlformats-officedocument.spreadsheetml.sheet
Size: 95743 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140127/9464b423/attachment-0002.xlsx>