[TRNSYS-users] Error in using the Equation tab

[David BRADLEY]

C.K. Lee,
   I would recommend that you open the *.lst file using a text editor; 
sometimes error messages such as this are written just after the 
offending equation is written so you get an idea of which equation 
caused the problem. If that does not help then I would recommend that 
you send the *.tpf and *.lst files to your distributor for assistance.
Kind regards,
  David



On 1/22/2014 20:41, C K Lee wrote:
> Hello, everyone.
>
> When I try to run a simulation, a receive the following error:
>
> *** Fatal Error at time   :         0.000000
>     Generated by Unit     : Not applicable or not available
>     Generated by Type     : Not applicable or not available
>     TRNSYS Message    405 : Illegal EQUATION formulation; the listed 
> equation is missing an operand between the close of the parentheses 
> and the numerical value
>     Reported information  : Not available
>
> As there is no information about which equation causes the error, I 
> have difficulty to trace the problem.  Do anyone know if there is 
> method to find the error source?  Thank you!
>
> Best Regards
> C. K. Lee
> City University of Hong Kong
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com