[TRNSYS-users] TRNSYS-users Digest, Vol 109, Issue 15

hotline hotline at Transsolar.com
Thu Jan 23 05:03:08 PST 2014


Not necessarily in the building. I guess you need to locate the problem by reducing the complexity of the model.
Try to summarize windows and make sure that the windows doesn't have more than 4 vertexes.
Switch off the radiation mode of every zone except one and check if it runs.

__________________________________________________________________________________________________

Jochen Lam
TRNSYS Software Team

Transsolar Energietechnik GmbH
Curiestraße 2
70563 Stuttgart
Fax:        +49 711 67976-11
Email:    jlam at transsolar.com<mailto:jlam at transsolar.com>
Web:      www.trnsys.de<http://www.trnsys.de>

Von: trnsys-users-bounces at cae.wisc.edu [mailto:trnsys-users-bounces at cae.wisc.edu] Im Auftrag von Toni Herena
Gesendet: Donnerstag, 23. Januar 2014 12:07
An: trnsys-users at cae.wisc.edu
Betreff: Re: [TRNSYS-users] TRNSYS-users Digest, Vol 109, Issue 15

Thank you. I have done what you suggest (even simulate the building withouth shadows) but the error message is the same. Does it means the problem is in the building?

2014/1/23 <trnsys-users-request at cae.wisc.edu<mailto:trnsys-users-request at cae.wisc.edu>>
Send TRNSYS-users mailing list submissions to
        trnsys-users at cae.wisc.edu<mailto:trnsys-users at cae.wisc.edu>

To subscribe or unsubscribe via the World Wide Web, visit
        https://mailman.cae.wisc.edu/listinfo/trnsys-users
or, via email, send a message with subject or body 'help' to
        trnsys-users-request at cae.wisc.edu<mailto:trnsys-users-request at cae.wisc.edu>

You can reach the person managing the list at
        trnsys-users-owner at cae.wisc.edu<mailto:trnsys-users-owner at cae.wisc.edu>

When replying, please edit your Subject line so it is more specific
than "Re: Contents of TRNSYS-users digest..."

Today's Topics:

   1. Re: Shading Matrix (hotline)


---------- Missatge reenviat ----------
From: hotline <hotline at Transsolar.com<mailto:hotline at Transsolar.com>>
To: "'TRNSYS users mailing list at the Solar Energy Lab, UW-Madison'" <trnsys-users at cae.wisc.edu<mailto:trnsys-users at cae.wisc.edu>>
Cc:
Date: Thu, 23 Jan 2014 10:09:17 +0000
Subject: Re: [TRNSYS-users] Shading Matrix
Dear Toni,

problems with the shading matrix usually appear when there are too many shading surfaces in the model. Try to delete
all unnecessary shading surfaces, if it still doesn't work generate the insolation matrix without  shadings to check if its
a building or shading surface problem.

Best

__________________________________________________________________________________________________

Jochen Lam
TRNSYS Software Team

Transsolar Energietechnik GmbH
Curiestraße 2
70563 Stuttgart
Fax:        +49 711 67976-11<tel:%2B49%20711%2067976-11>
Email:    jlam at transsolar.com<mailto:jlam at transsolar.com>
Web:      www.trnsys.de<http://www.trnsys.de>

Von: trnsys-users-bounces at cae.wisc.edu<mailto:trnsys-users-bounces at cae.wisc.edu> [mailto:trnsys-users-bounces at cae.wisc.edu<mailto:trnsys-users-bounces at cae.wisc.edu>] Im Auftrag von Toni Herena
Gesendet: Donnerstag, 23. Januar 2014 10:34
An: trnsys-users at cae.wisc.edu<mailto:trnsys-users at cae.wisc.edu>
Betreff: [TRNSYS-users] Shading Matrix

Hi everyone,

I'm currently modeling a building with some shading devices in facades (louvres). First modeled in sketchup3D and then imported to trnsys. There are some zones that are not convex, so I choose only the detailed radiation model for the right zones that can be calculated this way, and let the other zones (not important for the energy demand) with the standard radiation model.

I can generate the view factor matrix without any problem, but when I try to generate the shading/isolation matrix an error occurs and it doesn't create any file (well, it creates only a nearly empty .log file).

I must say that there are several zones in this building. I have made some test with other building to check if my shading isolation generator were working well and it performed ok. So is it a problem attached to this building? to the file? to the number of shading groups?

Thank you in advance and reggards.



[Imatge en línia 1]



--
Toni Herena

Responsable de projectes
Àrea Tècnica

Sistemes Avançats d'Energia Solar Tèrmica SCCL
C/ Roger de Llúria, 29 3r 2a 08009 Barcelona
Tel: (+34) 93 342 47 55<tel:%28%2B34%29%2093%20342%2047%2055> Fax: (+34) 93 342 47 56<tel:%28%2B34%29%2093%20342%2047%2056>
toni.herena at aiguasol.coop<mailto:toni.herena at aiguasol.coop>
http://www.aiguasol.coop<http://www.aiguasol.coop/>



<http://aiguasol.coop/2011/01/energy-thinking-days/>

P Contribuye con el Medio Ambiente y no imprimas este e-mail si no es imprescindibleneration

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu<mailto:TRNSYS-users at cae.wisc.edu>
https://mailman.cae.wisc.edu/listinfo/trnsys-users



--
Toni Herena

Responsable de projectes
Àrea Tècnica

Sistemes Avançats d'Energia Solar Tèrmica SCCL
C/ Roger de Llúria, 29 3r 2a 08009 Barcelona
Tel: (+34) 93 342 47 55 Fax: (+34) 93 342 47 56
toni.herena at aiguasol.coop<mailto:toni.herena at aiguasol.coop>
http://www.aiguasol.coop<http://www.aiguasol.coop/>



<http://aiguasol.coop/2011/01/energy-thinking-days/>

P Contribuye con el Medio Ambiente y no imprimas este e-mail si no es imprescindible
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140123/6af70f6e/attachment-0004.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 288921 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140123/6af70f6e/attachment-0004.png>


More information about the TRNSYS-users mailing list