[TRNSYS-users] Capacitance clarification in TYPE536

[Sharma Dev]

Dear Admins,

Parameter 14 : Capacitance of Collector, is "Capacitance of a solar collector" or "Capacitance of the array of collectors" ?

My confusion arises from the fact that in variable details, it is specified as "The capacitance of the solar collector and fluid it contains" i.e Single collector. Whereas in source code, nodal capacity is calculated by dividing this parameter by the number of collectors (number of series * number in parallel ).

Thanks

Dev Sharma
Institute for Renewable Energy

EURAC research
Institute for Renewable Energy
Via Luis-Zuegg 11, I-39100 Bolzano
t +39 0471 055 600
f +39 0471 055 699
dev.sharma at eurac.edu
www.eurac.edu<http://www.eurac.edu/>

EURAC research
Legal Seat
Viale Druso 1, I-39100 Bolzano

This transmission is intended only for the use of the addressee and may contain confidential or legally privileged information.
If you receive this transmission by error, please notify the author immediately by mail and delete all copies of this transmission and any attachments.
Any use or dissemination of this communication is strictly prohibited by the "Privacy-Code", D.Lgs. 196/2003 and may lead to penal prosecution and liability for damages.

P Think before you print

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140226/b1d06c3f/attachment-0004.htm>