[TRNSYS-users] ‏‏رد: TRNSYS-users Digest, Vol 110, Issue 16

[jeannieboef at gmail.com]

The definition of parameters is  that they DON'T change. I think what  
you want is a "parametric analysis" which means multiple simulation  
runs, with each run using a different parameter. Chech out the jplus  
support program interface.

Mit freundlichen Grüßen- Sent from my iPhone (excuse the brevity)

i. A.
Jean Marais
b.i.g. bechtold
Tel.   +49 30 6706662-23

On 13.02.2014, at 11:35, Adel Mohamed Abdelkader Abdeen <amabdeen at uqu.edu.sa 
 > wrote:

> Dear Sir,
> I used TRNSYS long time ago. I am interested to make like a  
> calculation-loop inside TRNSYS to study effect of a parameter like  
> collector area, Is it possibe and how?
>
> Regards,
>
> Adel
>
>
> ________________________________
>
> This email and any files transmitted with it are confidential and  
> intended solely for the use of the individual or entity to whom they  
> are addressed. If you have received this email in error please  
> notify Email System Administrator (e_admin at uqu.edu.sa ) . Please  
> note that any views or opinions presented in this email are solely  
> those of the author and do not necessarily represent those of the  
> Umm Al-Qura University. Finally, the recipient should check this  
> email and any attachments for the presence of viruses. The  
> Information Technology and Technical Support Center of Umm Al-Qura  
> University accepts no liability for any damage caused by any virus  
> transmitted by this email.
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users