[TRNSYS-users] TRNSYS-users Digest, Vol 110, Issue 12

Tung Nguyen Huy nguyenhuytung.cxd1 at gmail.com
Wed Feb 12 18:57:38 PST 2014


Dear All, especially Marion and David,

First of all, thank you so much for your kindness. I deeply appreciate your
help.
Ultimately, I could figure out those errors by following your instructions.
However, I found that I only need to capitalize all the names of zones in
Google Schetchup pro while I create new zones.

Now, I have another confusion about TRNSYS. I need to compute the COOLING
LOAD for an apartment. How can I simulate it? Which types should I use to
simulate? Because I saw many types in the TRNSYS Simulation Studio.

Thank you so much.

Yours sincerely,
Nguyen, Huy Tung


On Tue, Feb 11, 2014 at 10:00 AM, <trnsys-users-request at cae.wisc.edu> wrote:

> Send TRNSYS-users mailing list submissions to
>         trnsys-users at cae.wisc.edu
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         https://mailman.cae.wisc.edu/listinfo/trnsys-users
> or, via email, send a message with subject or body 'help' to
>         trnsys-users-request at cae.wisc.edu
>
> You can reach the person managing the list at
>         trnsys-users-owner at cae.wisc.edu
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
>
> Today's Topics:
>
>    1. Re: Error reading buifile (David BRADLEY)
>    2. Re: Error reading buifile (Marion Hiller)
>
>
> ---------- Forwarded message ----------
> From: David BRADLEY <d.bradley at tess-inc.com>
> To: "TRNSYS users mailing list at the Solar Energy Lab, UW-Madison" <
> trnsys-users at cae.wisc.edu>, nguyenhuytung.cxd1 at gmail.com
> Cc:
> Date: Mon, 10 Feb 2014 12:11:28 -0600
> Subject: Re: [TRNSYS-users] Error reading buifile
>  Huy Tung,
>   There isn't much in the way of tools to help debug an *.idf file that
> isn't importing correctly into TRNBuild. I have not gotten the exact error
> message that you mentioned but I have gotten similar ones. The import
> feature in TRNBuild almost always creates a complete *.b17 file (even if it
> won't open the *.b17 fully). I would recommend that you open the *.b17 with
> a text editor (such as Notepad) and see if you can locate the surface that
> is causing you the error then go back to SketchUp, delete the corresponding
> surface and redraw it.
>   In general it is highly recommended that you draw your building one zone
> at a time, match surfaces, then import the building into TRNBuild after
> each new zone is drawn. It becomes increasingly difficult to go back and
> find an error in the Trnsys3D plugin. By importing after drawing each new
> zone you make sure that you catch the error early.
>   Of course if you are unable to find the cause of the error you can send
> the *.idf to your distributor for assistance.
> Kind regards,
>  David
>
>
>
> On 2/9/2014 02:03, Tung Nguyen Huy wrote:
>
> Hello,
>
>  I made the house model by Google Sketchup Pro and match the surfaces by
> SURFACE MATCHING tool. However, when I use TRNSYS Simulation Studio to run
> the *.idf file. It notices an ERROR READING BUIFILE - "WALL SURFACE NUMBER
> IS NOT UNIQUE".
>
>  Please help me how to fix or how to avoid those errors. I met those
> errors many times, so I cannot do my work further.
>
>  Thank you so much.
>
>  Yours sincerely,
>
>  Nguyen, Huy Tung
>
>
> _______________________________________________
> TRNSYS-users mailing listTRNSYS-users at cae.wisc.eduhttps://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
> --
> ***************************
> David BRADLEY
> Principal
> Thermal Energy Systems Specialists, LLC
> 22 North Carroll Street - suite 370
> Madison, WI  53703 USA
>
> P:+1.608.274.2577
> F:+1.608.278.1475d.bradley at tess-inc.com
> http://www.tess-inc.comhttp://www.trnsys.com
>
>
>
> ---------- Forwarded message ----------
> From: Marion Hiller <Hiller at Transsolar.com>
> To: "TRNSYS users mailing list at the Solar Energy Lab, UW-Madison" <
> trnsys-users at cae.wisc.edu>
> Cc:
> Date: Tue, 11 Feb 2014 08:33:42 +0000
> Subject: Re: [TRNSYS-users] Error reading buifile
>
> Huy Tung,
>
>
>
> Did you draw the model using the plugin Trnsys3d?
>
>
>
> If you draw a surface in Trnsys3d it gets automatically assigned a "name"
> which is an arbitrary combination of numbers and characters.
>
> This field isn't an input and shouldn't be modified by the user in order
> to avoid errors.
>
> During the import in the Trnsys Studio, the *.idf file is translated into
> a *.b17 file and thereby the surface names are converted into
>
> unique surface IDs.
>
> The error messages shows you the zone and airnode name and the surface ID
> which is causing the error. I would recommend that you open the b17 error
>
> In a text editor and search for the surface ID and replace it by an unique
> number.
>
>
>
> Marion
>
>
>
>
>  ------------------------------
>
> *Von:* trnsys-users-bounces at cae.wisc.edu [mailto:trnsys-users-
> bounces at cae.wisc.edu] *Im Auftrag von *Tung Nguyen Huy
> *Gesendet:* Sonntag, 9. Februar 2014 09:04
> *An:* trnsys-users at cae.wisc.edu
> *Betreff:* [TRNSYS-users] Error reading buifile
>
>
>
> Hello,
>
>
>
> I made the house model by Google Sketchup Pro and match the surfaces by
> SURFACE MATCHING tool. However, when I use TRNSYS Simulation Studio to run
> the *.idf file. It notices an ERROR READING BUIFILE - "WALL SURFACE NUMBER
> IS NOT UNIQUE".
>
>
>
> Please help me how to fix or how to avoid those errors. I met those errors
> many times, so I cannot do my work further.
>
>
>
> Thank you so much.
>
>
>
> Yours sincerely,
>
>
>
> Nguyen, Huy Tung
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140212/afab1914/attachment-0004.htm>


More information about the TRNSYS-users mailing list