[TRNSYS-users] tiles and under tiles

[David BRADLEY]

Karol,
   I would definitely choose a massive layer for the tiles themselves. I 
typically ignore the presence of the battens and treat that layer as an 
airgap (there is a material in the wall layer library for an airgap).
Kind regards,
  David


On 2/11/2014 12:18, Karol Bandurski wrote:
>
> Dear All,
>
> I would like to ask you how can I model the last layer of sloping roof?
>
> I mean tiles, battens and counter battens and air gap between.
>
> What parameters should I choose: massless or massive?
>
> If massive, what value for conductivity, capacity and density are you 
> suggest?
>
> Kind regards,
>
> Karol
>
> ------------------------------------------------
>
> Karol Bandurski MSc.
>
> Institute of Environmental Engineering <http://www.ee.put.poznan.pl/>
>
> Poznan University of Technology
>
> www.put.poznan.pl/~karol.bandurski 
> <http://www.put.poznan.pl/%7Ekarol.bandurski>
>
> www.ee.put.poznan.pl <http://www.ee.put.poznan.pl>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140212/2e8076c6/attachment-0004.htm>