[TRNSYS-users] Problem with Trnsys battery model

[David BRADLEY]

Daniel,
  Which version of TRNSYS are you using? You can check by opening the 
file ..\TrnsysXX\trnsys.ini using a text editor.
Kind regards,
  David

On 12/10/2014 13:36, Daniel Blanco Moa wrote:
>
> Dear Trnsys users,
>
> I have modeled a very simple system with a battery (type 47a), a 
> regulator (type 48d) and two txt entries (load and generation), that 
> is part of a bigger system. The battery does not seem to work 
> properly, I mean, is not doing a "simple energy balance" as stated in 
> Trnsys manual, so I do not know what is on as I am not profficient in 
> Fortran.
>
> I attach the Trnsys files and an Excel file where I have checked the 
> numbers.
>
> Thank you very much for your help.
>
>
> Daniel
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20141210/f4a92f09/attachment-0003.htm>