[TRNSYS-users] cooling type manager

David BRADLEY d.bradley at tess-inc.com
Mon Dec 1 09:01:25 PST 2014


Safwan,
  The cooling type is still defined in Type56 but it is not used by any 
of the zones. Make one of the zones active in TRNBuild and click on the 
"cooling" button; you'll note that cooling is set to "off" for all three 
zones.

  I should mention that some problems with the restaurant absorption 
chiller example were fixed in the Trnsys17.2/TESSLibs17.2 release and 
that if you have not updated, you should do so.
Regards,
  David



On 11/27/2014 16:23, Safwan Kanan wrote:
> Dear All,
> I am trying to simulate absorption chiller with Type 56 and I confused 
> when I found in manual (5) page 82, it says ( If the cooling equipment 
> is modeled external to the TYPE 56 component, the cooling type should 
> not be used). So why I found cooling type is defined in restaurant 
> absorption chiller example?Could you please explain to me should I 
> define cooling type or not in TrnBuild?
>
> Regards,
>
> Safwan Kanan
> University of Manchester
> Manchester
> M13 9PL
> UK
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20141201/b3928069/attachment-0004.htm>


More information about the TRNSYS-users mailing list