[TRNSYS-users] Type 15-7

David BRADLEY d.bradley at tess-inc.com
Mon Dec 1 09:03:31 PST 2014


Stefan,
   If the TRY file has not been modified in some way then Type15 (mode 
7) should be able to read it. I would recommend that you make a project 
that contains only the Type15 and a  Type65, verify that you get the 
same error, and then send it (along with the *.try file that is causing 
problems) to your distributor.
Kind regards,
  David


On 11/27/2014 08:03, Stefan Hampel wrote:
> Hey,
> i try to build up a PV- Simulation with German weatherdata given in 
> TRY format. Therefore i use the Type 15-7 .But always when i run a 
> simulation it says" Unable to correctly read from the supplied data 
> file - please check the file and re-run the simulation"in the 
> list-file. I tried a few thinks,but i cant get it to work.
> Any suggestions?
>
> Thanks
>
>
> Stefan
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20141201/95828f8d/attachment-0001.htm>


More information about the TRNSYS-users mailing list