[TRNSYS-users] Simulation Error

[Omar Abu-Hamdeh]

Dear All,



When attempting to run my simulation, an error window appears and says that there are 2 errors in the deck file. Here are the errors:




*** Fatal Error at time   :         0.000000
    Generated by Unit     :    56
    Generated by Type     :    56
    Message               : Error in automatic heat transfer calculation for surface   2 or its adjacent surface!: Automatic heat transfer calculation is only allowed on surfaces within a zone. Please check building input file (.bui)!

*** Fatal Error at time   :         0.000000
    Generated by Unit     :    56
    Generated by Type     :    56
    Message               : Error in automatic heat transfer calculation for surface   2 or its adjacent surface!: Automatic heat transfer calculation is only allowed on surfaces within a zone. Please check building input file (.bui)!

*** Simulation stopped with errors
    Total Notices         :        17
    Total Warnings        :         0
    Total Fatal Errors    :         2



Any help would be appreciated.



Omar
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140804/58774546/attachment-0005.htm>