[TRNSYS-users] The results of your email commands

[saja al-rifai]

dear TRNSYS users,

I need to calculate the pump maximum power required for the solar thermal system used evacuated tube or flat plate collectors, but i don't know the pressure difference before and after storage tank and solar collector. how can calculate the pressure, there is no pressure parameters considered for in TRNSYS componet.

Saja
On Wednesday, April 23, 2014 7:14 PM, "trnsys-users-owner at cae.wisc.edu" <trnsys-users-owner at cae.wisc.edu> wrote:
 
----- Forwarded Message -----

The results of your email command are provided below. Attached is your
original message.

- Results:
    Ignoring non-text/plain MIME parts

- Unprocessed:
    Welcome to the TRNSYS-users at cae.wisc.edu mailing list!
    To post to this list, send your email to:
    �trnsys-users at cae.wisc.edu
    General information about the mailing list is at:
    �https://mailman.cae.wisc.edu/listinfo/trnsys-users
    If you ever want to unsubscribe or change your options (eg, switch to
    or from digest mode, change your password, etc.), visit your
    subscription page at:
    �https://mailman.cae.wisc.edu/options/trnsys-users/srhihi2003%40yahoo.com
    You can also make such adjustments via email by sending a message to:
    �TRNSYS-users-request at cae.wisc.edu

- Ignored:
    with the word `help' in the subject or body (don't include the
    quotes), and you will get back a message with instructions.
    
    You must know your password to change your options (including changing
    the password, itself) or to unsubscribe.�It is:
    
    �SAJAmoon2003
    
    Normally, Mailman will remind you of your cae.wisc.edu mailing list
    passwords once every month, although you can disable this if you
    prefer.�This reminder will also include instructions on how to
    unsubscribe or change your account options.�There is also a button on
    your options page that will email your current password to you.

- Done.


On Wednesday, April 23, 2014 7:06 PM, "trnsys-users-request at cae.wisc.edu" <trnsys-users-request at cae.wisc.edu> wrote:
 
Welcome to the TRNSYS-users at cae.wisc.edu mailing list!

To post to this list, send your email to:

  trnsys-users at cae.wisc.edu

General information about
 the mailing list is at:

  https://mailman.cae.wisc.edu/listinfo/trnsys-users

If you ever want to unsubscribe or change your options (eg, switch to
or from digest mode, change your password, etc.), visit your
subscription page at:

  https://mailman.cae.wisc.edu/options/trnsys-users/srhihi2003%40yahoo.com


You can also make such adjustments via email by sending a message to:

  TRNSYS-users-request at cae.wisc.edu

with the word `help' in the subject or body (don't include the
quotes), and you will get back a message with instructions.

You must know your password to change your options (including
 changing
the password, itself) or to unsubscribe.  It is:

  SAJAmoon2003

Normally, Mailman will remind you of your cae.wisc.edu mailing list
passwords once every month, although you can disable this if you
prefer.  This reminder will also include instructions on how to
unsubscribe or change your account options.  There is also a button on
your options page that will email your current password to you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140423/8b257154/attachment-0004.htm>