[TRNSYS-users] fuel cell, electrolyzer, H2 tank problem

[mohammad sadigh behzadi]

hi everyonei was going to implement a controller for controlling a hybrid pv/fc system but unfortunately when i try to write it's program i face with a mechanical issue.
i have a 400w elevtrolyzer with outlet H2 flow rate of 0.006 m^3/hr and its output pipe Cross section (cm^2) is unknown and it;s operating H2 presure is 10 bar
a 2kw fuel cell with inlet H2 flow rate of 3.4 m^3/hr that it's input pipe cross section area (cm^2) is unknow either and it;s operating H2 presure is 10bar and a 10kg H2 tank that holds H2 till 10 bar pressure
should i directly link : 1-outlet flow rate of electrolyzer to inlet H2 input of H2 tank         ???
                                    2-inlet flow rate of fuel cell to outlet H2 input of H2 tank
that's my question

sincerely yours mohammad behzadi 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140410/ed018fa5/attachment-0004.htm>