[TRNSYS-users] Clarifications CHILED CEILING

[David BRADLEY]

Davide,
   These topics are covered in the 05-MultizoneBuilding.pdf located in 
the \Trnsys17\Documentation\ directory. The input data required for the 
chilled ceiling model is discussed in section 5.2.4.2.4 while the 
mathematical model is discussed in 5.4.5
Regards,
  David




On 4/7/2014 06:02, Davide della Croce wrote:
>
> Hello,
>
> I'm a new user of TRNSYS and I'm simulating the energy performance of 
> an existing building for my thesis.
>
> Unfortunately I have some problem in the simulation of radiant ceiling 
> panels (panels RDZ B!klimax 2200x600 sheets of which I enclose).
>
> To simulate the radiant ceiling panels I thought of introducing into a 
> wall type a layer "child ceiling". But I didn't clear some voices in 
> the LAYER TYPE MANAGER, what is meant by: NORM SPECIFIC POWER, NORMAL 
> SPECIFIC MASS FLOW AREA NORM, NORM NUMBER OF LOOPS.
>
>
> And what is the difference with the voices of the "DEFINITION CHILLED 
> CEILING" in the ZONE MANAGER: NUMBER LOOPS OF FLUID, MASS INLET FLOW RATE.
>
> Thank you
>
> Davide
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140407/6dc8c50e/attachment-0004.htm>