[TRNSYS-users] Chiller Load Problem

[David BRADLEY]

Abhay,
It is not really possible to diagnose the problem without seeing the 
project. Please send your project and all files required to run it to 
your distributor's technical support. If you aren't sure who your 
distributor is then please email me your user id number (which can be 
found by opening the ..\Trnsys17\user17.id file using a text editor) and 
I can point you towards the correct person.
Regards,
David



On 4/8/2014 05:04, Abhay Pratap Singh wrote:
> Dear Trnsys user's
>
> i am modelling a building which is cooled by using 2-pipe fan coil
> unit. The Chiller setpoint is 7 degree C and flow rate is 1385 kg/hr.
> The building loads are vary in every hour but i m getting constant
> return temperature of water due to which the chiller load is also
> constant.
>
> Thank you

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com